Forge Motorsport Blow Off Valve and Kit for R58 2011 Onwards

(No reviews yet) Write a Review

£244.74 £244.74 £195.79

(You save £48.95 )

Brand: Forge Motorsport
SKU:: aj7c0zco7t
Condition:: New
PART:: ENGINE TUNING
BRAND:: FORGE MOTORSPORT
QUICKCODE:: FORGE-FMDVR60A

Description
Shipping & Returns
Show Reviews

Designed specifically for the BMW/Peugeot N18 engines, (Cooper S 2011 onwards, JCW Cooper S 2013 onwards, R58 Coupe 2012 onwards, Peugeot 208 GTi late 2012 onwards, RCZ THP 156 & 200 2011 on). This product is either recommended where the boost pressure has been increased by an ECU software upgrade, for those wanting a loud blow off sound, or simply as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem (see image above).

The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles and oil contamination, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. (see image above)

Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included.

In order that you purchase the correct valve for your vehicle please refer to the fitment table below before ordering.

Product Code	Fitment
FM207V	Recirc Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012
FMDVR60R	Recirc Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards
FMDVMCS	Blow Off Adaptor Plate For 2007/8 Cooper S Turbo only
FMDVR56A	Blow Off Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012
FMDVR60A	Blow Off Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards

In The Box:
1 x FMDVR60A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x 2000mm Length of 4mm Vac Hose
1 x Aluminium Spacer
1 x M6 x 30 Hex Head Bolt
1 x M6 Penny Washer
1 x M6 Nyloc Nut
1 x Uprated Red Spring
10 x Cable Ties
1 x 5mm T Piece
1 x Forge USB Instructions
1 x Forge Keyring and Sticker

Patent applied for

This product is available in machined alloy finish only

Performance M Delivery Information

BREXIT 2021 EUROPEAN TAXATION CHANGES:

For European Customers prices now displayed in cart once you enter your address will have 20% UK VAT Tax removed, however you will have to pay some form of Duties / VAT prior to delivery of your goods. If you are unsure of charges we recommend you should contact your local authorities ahead of placing your order.

Do we ship abroad ?

Yes we do, to almost anywhere in the world though remember the postage is often high when shipping anything bulky. Most bulky items we export will go by UPS so you can track the package online and could reach America within 48 hours providing its in stock !

However there are a few countries we do not ship to, some of these include: Thailand, Malaysia, Indonesia, Russia, Nigeria, Macedonia, Syria, Ukraine, Lebanon.

Why is postage on bulky items to some countries expensive compared to some other companies ?

For both yours and our safety we use well known couriers such as DPD Local and UPS for shipping, then we know exactly where it is in the world at any time and we know its going to arrive safely. Shipping small items can be cheap, but items such as bodykits are expensive to ship - we have a very small margin on the postage fees merely to cover packaging. We can now ship using standard post on some items, however using all methods you may incur import charges when you receive the goods for which we cant be responsible for.

Availability:

Not everything on our website is in stock, if you need a part desperately please contact us first to confirm availability before placing your order

How do I place an order if I live within the UK ?

You can either order here in our online shop or you can phone us or email us, using the following number/address: Phone: 0161 507 5005 email: sales@performancem.co.uk

How do I place an order if I live outside the UK ?

You can order online or by emailing us. email: sales@performancem.co.uk